1.Check the dustbin and filters
1. Clean the dustbin and the filters.
2. Remove any blockages from the dustbin air inlet.
3. Check the seal rings of motor air inlet/dustbin cover/mesh filter to make sure it's in good shape and well installed.
Unless prompted to do so, do not press the trigger when checking any part of the machine.
1. Clean the dustbin and the filters.
2. Remove any blockages from the dustbin air inlet.
3. Check the seal rings of motor air inlet/dustbin cover/mesh filter to make sure it's in good shape and well installed.
1. Remove any blockages from the tube.
2. Remove any hair wrapped around the brush roller.
3. Remove any blockages from the brush chamber, dirt channel and the brush connector.
Remove any blockages from the motor air inlet.
support@tineco.com
