Check the dustbin and the filters
1.Rinse the dustbin and mesh filter with cold running water.
2.Clean the pre filter with Tineco rinse-free filter cleaning tool.
3.Reinstall the dustbin and filters correctly when it is dried completely.
Unless prompted to do so, do not press the trigger when checking any part of the machine.
Check the dustbin and the filters
1.Rinse the dustbin and mesh filter with cold running water.
2.Clean the pre filter with Tineco rinse-free filter cleaning tool.
3.Reinstall the dustbin and filters correctly when it is dried completely.
Check the the tube and the power brush
1. Remove any foreign objects or clogging debris from the tube.
2. Remove any blockages from the brush chamber, dirt channel and the brush connector.
Check the brush roller
Remove any hair or debris wrapped around the brush roller.
Check the motor
Remove any blockages from the motor air inlet and outlet.
support@tineco.com
